Views: 97 Author: Site Editor Publish Time: 2021-02-05 Origin: Site
Friends who have used the glue binding machine should know that in the process of using the glue binding machine, there will often be a lot of hot melt glue on the glue binding machine. With the increase of hot melt glue, the work efficiency of the glue binding machine will be more and more reduced. At this time, we have to clean the glue binding machine, but how to clean the hot melt glue on the glue binding machine to better clean it, I will give you a brief introduction below.
In fact, the hot melt glue on the glue binding machine can be washed away with solvents. It can be very clean and not difficult to clean the glue binding machine with solvents. It can be cleaned by the following steps:
1. Buy ethyl acetate at a chemical drug store. Ethyl acetate is an aromatic ester that can be used as a raw material for food flavors and as a thinner for varnish. Non-toxic and harmless, here we are using it as a cleaning agent.
2. Use a cotton cloth dipped in ethyl acetate to wash the glue filling machine to dissolve and dilute the hot melt glue that is also organic, and it will wash away a little bit slowly. The chemical principle used here is the principle of similarity compatibility.
3. Then check whether it is smooth and whether there is some hot melt glue that has not been dissolved. If there is still glue, use the above methods to wash again. The hot melt glue on the glue machine can be completely cleaned by repeated cleaning several times.
The above is the method of cleaning the hot melt adhesive of the glue machine, I hope it can be helpful to everyone.